Drag Mouse Over The Image To Zoom View.
Description
VURA PowerSeal +
TRANSPARENT SURFACE PROTECTION AGENT, EXCELLENT
WATER & OIL REPELLENT AND STAIN RESISTANT TO THE
TREATED SURFACE
VURA PowerSeal + water based synthetic polymer , provides a transparent and durable surface treatment for various kind of building materials such as Polished Porcelain Tiles, Natural stones, Marble and Granite, Terracotta, concrete and bricks. It provides excellent water and oil repellency to the treated surfaces, as well as stain resistance against oil, coffee, Ketchup and mustard among the others.
VURA PowerSeal + does not create a film on the surface and does not affect the original color and breathability of the material. The surfaces treated with Vura PowerSeal are easy to clean without altering original appearance of the stone.
CHARACTERISTICS
- Water and oil-repellent with natural finish
- Excellent anti stain properties
- Easy to clean properties
- Long lasting treatment
- Water based
- Extreme Eco compatible
- The best environmentally-friendly stain protection for porcelain tiles, natural stone, marble and granite with polished, brushed and matt smoothed finishes
- Reduces absorption without affecting the material's natural look
- It protects and facilitates cleaning
- It is also ideal for grouting joints, ceramic and crackle effect surfaces, grit, resin- marble, and stone slabs
- Is also suitable for treating coloured cement tiles and manufactured stones
- It provides an anti-graffiti protection that prevents graffiti paint from bonding to surfaces
Documents & Downloads
ADVANTAGES
- Solvent free: Water based eco-friendly treatment- Being a water-based product, it withstands residual humidity conditions and can therefore be applied 24–48 hours after the initial wash, thus speeding up the treatment
- Single-coat application: apply the product and rub it gently over the surface until it is completely absorbed
- Does not form surface film and does not yellow
- Ideal for protecting tables, as well as kitchen and bathroom tops
- The surface can be walked on after just 2 hours. (23° C & 50% R.H.)
- A product with an extremely low VOC and a low environmental impact
APPLICATION
- VURA PowerSeal + is ready to use product so no dilution is required
- Apply VURA PowerSeal + evenly and continuously on a clean and dry surface using brush or fleece pad
- Remove any excess wet product before it dries (5-10 minutes in normal conditions) using a clean cloth
- VURA PowerSeal + can be applied with low pressure deck sprayer. Saturated brush, roller or by mop application in one or two layers depending on the surface porosity
- On highly absorbent materials, apply 2 coats of product with 20-30 min interval time
- The surface can be walked on after just 2 hrs.
- Water and oil repellent protection takes effect after 24 hrs.
Description
VURA Oxi 7010
Vura Oxi 7010 is two components, epoxy base, gel form, solvent-free, thixotropic paste to fill and to firmly glue marble, stone, granite, quartz and ceramic. Suitable for outdoor and indoor application with low yellowing. it is soft and light with high gloss and brightness
CHARACTERISTICS
- Very neutral colour & easy to spread
- Low VOC content
- Very low tendency to yellow
- High creeping strength due to gel-like consistency
- Easy dosing and mixing by use
- Weather-resistant bonding
- Good dimensional stability of the bonding layer
- Low tendency to fatigue
- Good adhesion on slightly humid stones
- Very low shrinkage during the hardening process and therefore low tensions in the bonding layer
- Very good alkali-stability, thus the adhesive is very well suited to bond concrete
- Excellently suited for bonding gas-impermeable materials as it is a solvent-free product
Usage Guide
MIXING & APPLICATION
Vura Oxi 7010is mainly used in the stone-working industry for the weather-resistant bonding and glueing of natural stone (marble, granite), Artificial stone or building materials (terrazzo, concrete).
The two parts ie. glue and hardener must be kept on the original cans/tins. Thoroughly clean and slightly roughen surfaces to be bonded. Thoroughly mix 2 parts (A+B) (by weight) of component A with 1 part (by weight) of component B until a homogeneous mix is achieved.
Avoid the use of plastic made of PVC, do use only plastic resistant to corrosive liquids. Take out from the two containers A and B the required amounts indicated in weight, of the two components. Mix very well the 2 parts A+B and proceed to use. During the mixing use clean tools. Ensure that the marble to be treated with the resin is completely dry and clean.
By means of the application of high- quality raw materials it was possible to develop a system which hardly yellows. Because of its gel-like consistency the product has a high creeping strength on vertical surfaces. It is nevertheless possible to attain thin adhesive joints. Other materials can also be glued with Oxi 7010, e.g. paper, wood, glass and many other materials.
we suggest to verify the ratio every time. To clean the tools, we suggest to use aromatic and light solvent, The hardening process is accelerated by heat and delayed by cold.
