Drag Mouse Over The Image To Zoom View.
Description
VURA Oxi2010
VURA Oxi 2010 is a two-component, low viscous, transparent and non-yellowing epoxy resin system with a modified hardener. It is used for firmly closing cracks and pores of any type of natural stones even for light color stones.
CHARACTERISTICS
- Hardens relatively quickly
- It has highly penetrative properties on account of its low viscosity
- Clear transparent, best suitable for light natural stones
- Solvent free epoxy system
- Weather-resistant
- Chemical resistant
- Excellent grinding and polishing properties
- Increases the firmness and improves the quality of natural stone surfaces
- Increases the yield and the productivity
- Excellent product to fill pinholes and cracks of light-colored marble
- Good reactivity at low temperature, medium hardness
Documents & Downloads
Usage Guide
- All type of marble/granite- Natural Stones
VURA Oxi 2010 is mainly used in the stone-working industry for strengthening porous and fissured natural stone slabs, concrete and concrete ashlar and improving their surface qualities. In combination with spun glass fabrics, it is also used for strengthening brittle natural stone slabs.
SURFACE PREPARATION
- Ensure that the stone to be treated with resin is completely dry and clean
- If the surface of the stone is pre-warmed (60° C to 70° C), the penetrative capacity of the product will be increased
- VURA Oxi 2010 should not be applied to wet surfaces
APPLICATION
- Use safety gloves and safety glasses during application
- Mix part-A and part-B homogeneously in the ratio of 2:1 and apply on the substrate
- During the mixing use clean tools
- VURA Oxi 2010 coloring concentrates or stone ink can be used for coloring if required (max. 5%)
- The mixture remains workable for approx. 20-30 minutes at 20° C and is applied to the whole surface with a fine-toothed spreader; apply more than once in the areas of greater absorption
- Cracks which are running completely through the stone are to be closed on the back before application of VURA Oxi 2010
- The surfaces can be grinded and polished after approx. 24 hours at room temperature
- A layer of VURA Oxi 2010 should be applied on after initial cutting the substrate
- Foot traffic mat begin after 6-8 hours
- Tools can be cleaner with appropriate solvent immediately after application and allow them dry in well-ventilated area
- Warmth accelerates and cold retards the hardening process
- Empty the container fully before disposing of it
- Mixing ratio should be maintained otherwise performance will affect
Drag Mouse Over The Image To Zoom View.
Description
VURA Oxi2010
VURA Oxi 2010 is a two-component, low viscous, transparent and non-yellowing epoxy resin system with a modified hardener. It is used for firmly closing cracks and pores of any type of natural stones even for light color stones.
CHARACTERISTICS
- Hardens relatively quickly
- It has highly penetrative properties on account of its low viscosity
- Clear transparent, best suitable for light natural stones
- Solvent free epoxy system
- Weather-resistant
- Chemical resistant
- Excellent grinding and polishing properties
- Increases the firmness and improves the quality of natural stone surfaces
- Increases the yield and the productivity
- Excellent product to fill pinholes and cracks of light-colored marble
- Good reactivity at low temperature, medium hardness
Usage Guide
- All type of marble/granite- Natural Stones
VURA Oxi 2010 is mainly used in the stone-working industry for strengthening porous and fissured natural stone slabs, concrete and concrete ashlar and improving their surface qualities. In combination with spun glass fabrics, it is also used for strengthening brittle natural stone slabs.
SURFACE PREPARATION
- Ensure that the stone to be treated with resin is completely dry and clean
- If the surface of the stone is pre-warmed (60° C to 70° C), the penetrative capacity of the product will be increased
- VURA Oxi 2010 should not be applied to wet surfaces
APPLICATION
- Use safety gloves and safety glasses during application
- Mix part-A and part-B homogeneously in the ratio of 2:1 and apply on the substrate
- During the mixing use clean tools
- VURA Oxi 2010 coloring concentrates or stone ink can be used for coloring if required (max. 5%)
- The mixture remains workable for approx. 20-30 minutes at 20° C and is applied to the whole surface with a fine-toothed spreader; apply more than once in the areas of greater absorption
- Cracks which are running completely through the stone are to be closed on the back before application of VURA Oxi 2010
- The surfaces can be grinded and polished after approx. 24 hours at room temperature
- A layer of VURA Oxi 2010 should be applied on after initial cutting the substrate
- Foot traffic mat begin after 6-8 hours
- Tools can be cleaner with appropriate solvent immediately after application and allow them dry in well-ventilated area
- Warmth accelerates and cold retards the hardening process
- Empty the container fully before disposing of it
- Mixing ratio should be maintained otherwise performance will affect
