Drag Mouse Over The Image To Zoom View.
Description
VURA Polifill L
VURA PoliFill-L is a water clear liquid, low viscous 2 component product based on UV-stabilized, unsaturated premium polyester resins. It is used for gluing and filling clear white marbles like Carrara and similar stones, also for filling the travertines and similar stones. Very stable to sunlight. It has a very low shrinkage. At low temperature, it has good reactivity.
CHARACTERISTICS
- Premium polyester base transparent liquid
- Low viscosity, therefore very good penetration
- No color of its own, therefore suited for light and white, mainly transparent-crystalline natural stones
- Fast setting and curing time
- Easily to apply and polish
- Good UV stability
- Very good adhesion on natural stone
- Bigger defects, corners and edges can be filled due to slow hardening and low tensions
- Resistant to water, petrol and mineral oils
- Grindable after hardening
- Colors can be mixed as per desired
Documents & Downloads
APPLICATION AREAS
VURA PoliFill-L is mainly used in stone processing industry for strengthening of larger areas of light or white, transparent- crystalline natural stones e.g. Thassos, Carrara, Onyx etc.. Due to its low viscosity, liquid and colourless-transparent appearance, bonding can be made which maintain the stereoscopic structure of the stone.
By adding little quantity of Polyester color paste a similar look like natural stone can be achieved.
Granite, Marbles, Tiles, Sandstones, Cementitious tiles. Walls, floors, Tile on tile applications, Dry areas, worktops.
Usage Guide
SURFACE PREPARATION
The surface to be treated must be clean, completely dry and roughened. It should be free of moisture, dirt, oil and grease etc. Colouring is possible by adding Polyester colouring pastes up to max 5%.
APPLICATION METHOD
Use gloves during application. Ensure proper and thorough mixing of resin (Part A) and hardener (Part B) before applying. The mixture can be worked for approx. 15-20 minutes (23° C). Do not allow excess material to dry on surface. After approx. 6-8 hours the treated parts can be exposed to strain, after 12 hours approx. they can be further processed (grinding, milling, drilling). The hardening process is accelerated by heat and delayed by cold. Tools can be cleaned with thinner or mineral spirit.
Drag Mouse Over The Image To Zoom View.
Description
VURA Polifill L
VURA PoliFill-L is a water clear liquid, low viscous 2 component product based on UV-stabilized, unsaturated premium polyester resins. It is used for gluing and filling clear white marbles like Carrara and similar stones, also for filling the travertines and similar stones. Very stable to sunlight. It has a very low shrinkage. At low temperature, it has good reactivity.
CHARACTERISTICS
- Premium polyester base transparent liquid
- Low viscosity, therefore very good penetration
- No color of its own, therefore suited for light and white, mainly transparent-crystalline natural stones
- Fast setting and curing time
- Easily to apply and polish
- Good UV stability
- Very good adhesion on natural stone
- Bigger defects, corners and edges can be filled due to slow hardening and low tensions
- Resistant to water, petrol and mineral oils
- Grindable after hardening
- Colors can be mixed as per desired
APPLICATION AREAS
VURA PoliFill-L is mainly used in stone processing industry for strengthening of larger areas of light or white, transparent- crystalline natural stones e.g. Thassos, Carrara, Onyx etc.. Due to its low viscosity, liquid and colourless-transparent appearance, bonding can be made which maintain the stereoscopic structure of the stone.
By adding little quantity of Polyester color paste a similar look like natural stone can be achieved.
Granite, Marbles, Tiles, Sandstones, Cementitious tiles. Walls, floors, Tile on tile applications, Dry areas, worktops.
Usage Guide
SURFACE PREPARATION
The surface to be treated must be clean, completely dry and roughened. It should be free of moisture, dirt, oil and grease etc. Colouring is possible by adding Polyester colouring pastes up to max 5%.
APPLICATION METHOD
Use gloves during application. Ensure proper and thorough mixing of resin (Part A) and hardener (Part B) before applying. The mixture can be worked for approx. 15-20 minutes (23° C). Do not allow excess material to dry on surface. After approx. 6-8 hours the treated parts can be exposed to strain, after 12 hours approx. they can be further processed (grinding, milling, drilling). The hardening process is accelerated by heat and delayed by cold. Tools can be cleaned with thinner or mineral spirit.
