Drag Mouse Over The Image To Zoom View.
Description
VURA Polifill G
VURA PoliFill-G is a gel-like semi solid 2 component product based on unsaturated premium polyester resins. It is thixotropic transparent gel with high viscosity for glueing and fixing marbles, stones, tiles and to fill cracks.
CHARACTERISTICS
- Premium polyester base thixotropic transparent gel
- Fast setting and curing time
- Easily to apply and polish
- Good UV Stability
- Very good adhesion on natural stone
- Bigger defects, corners and edges can be filled due to slow hardening and low tensions - Resistant to water, petrol and mineral oils
- Grindable after hardening
- Colors can be mixed as per desired
Documents & Downloads
APPLICATION AREAS
Granite, Marbles, Tiles, Sandstones, Cementitious tiles. Mainly used in the stone processing industry for filling and bonding light or white, transparent- crystalline natural stone such as Thassos, Carrara, Onyx etc. By adding little quantities of polyester coloring pastes to VURA PoliFill-G required color can be made. Thus, an appearance very similar to the stone or bonding joints which are almost invisible can be achieved. When working with crystalline natural stone we recommend mixing some crushed granular material in the filler to imitate the crystal structure of the stone. Walls, floors, tile on tile applications, dry areas, and worktops.
Usage Guide
For the treatment of ground and polished absorbent marble, natural stone, slate, limestone, sandstone, granite, travertine etc.
SURFACE PREPARATION
- The surface to be treated must be clean, completely dry and roughened. It should be free of moisture, dirt, oil and grease etc.
- Coloring is possible by adding Polyester pigment concentrates liquid upto 5% max
- Dilution is not possible
APPLICATION
Use gloves during application. Ensure proper and thorough mixing of resin (Part A) and hardener (Part B) before applying. Stir them energetically and use the product thus obtained. The mixture can be worked for approx. 15-20 minutes (23° C). Do not allow excess material to dry on surface. After approx. 6-8 hours the treated parts can be exposed to strain, after 12 hours approx. they can be further processed (grinding, milling, drilling). Do not mix any solvents. Add 1 to 2g of Hardener B (liquid) in 100g of PoliFill-G.
The hardening process is accelerated by heat and delayed by cold. Tools can be cleaned with thinner or mineral spirit.
Keep the tins closed after usage. Keep the gel and hardener away from the sunlight.
Description
VURA Oxi 7010
2 COMPONENTS, GEL FORM, EPOXY BASE THIXOTROPIC GLUE/PASTE
Vura Oxi 7010 is two components, epoxy base, gel form, solvent-free, thixotropic paste to fill and to firmly glue marble, stone, granite, quartz and ceramic. Suitable for outdoor and indoor application with low yellowing. it is soft and light with high gloss and brightness
CHARACTERISTICS
- Very neutral colour & easy to spread
- Low VOC content
- Very low tendency to yellow
- High creeping strength due to gel-like consistency
- Easy dosing and mixing by use
- Weather-resistant bonding
- Good dimensional stability of the bonding layer
- Low tendency to fatigue
- Good adhesion on slightly humid stones
- Very low shrinkage during the hardening process and therefore low tensions in the bonding layer
- Very good alkali-stability, thus the adhesive is very well suited to bond concrete
- Excellently suited for bonding gas-impermeable materials as it is a solvent-free product
Usage Guide
MIXING & APPLICATION
Vura Oxi 7010is mainly used in the stone-working industry for the weather-resistant bonding and glueing of natural stone (marble, granite), Artificial stone or building materials (terrazzo, concrete).
The two parts ie. glue and hardener must be kept on the original cans/tins. Thoroughly clean and slightly roughen surfaces to be bonded. Thoroughly mix 2 parts (A+B) (by weight) of component A with 1 part (by weight) of component B until a homogeneous mix is achieved.
Avoid the use of plastic made of PVC, do use only plastic resistant to corrosive liquids. Take out from the two containers A and B the required amounts indicated in weight, of the two components. Mix very well the 2 parts A+B and proceed to use. During the mixing use clean tools. Ensure that the marble to be treated with the resin is completely dry and clean.
By means of the application of high- quality raw materials it was possible to develop a system which hardly yellows. Because of its gel-like consistency the product has a high creeping strength on vertical surfaces. It is nevertheless possible to attain thin adhesive joints. Other materials can also be glued with Oxi 7010, e.g. paper, wood, glass and many other materials.
we suggest to verify the ratio every time. To clean the tools, we suggest to use aromatic and light solvent, The hardening process is accelerated by heat and delayed by cold.
