Drag Mouse Over The Image To Zoom View.
Description

VURA AcryStik

VURA AcryStik is a white acrylic based polymer liquid with multipurpose uses to provide flexible cementitious coating system. VURA AcryStik polymer adds to the potential use as well as enhances the properties of cement slurry/mortar/concrete making them excellent choice for use in new as well as renovation work. It is a modified acrylic polymer for coating, bonding agent, repair and priming of reinforce concrete. It is economical and hard wearing system with water resistance property






Features

- Combines a tough, flexible, hard-wearing surface with waterproofing
- Enhances the properties of cement slurry / mortar / concrete
- Develops excellent bond to most building materials
- UV resistance & Non corrosive to mild chemicals attack
- High durability in continuous wet condition
- Protective coating for cement surfaces
- Allows trapped vapour to escape thus preventing peeling and blistering.
- Reduces or prevents salt penetration into concrete
- Is non-flammable and does not give off toxic gases, when exposed to fire
- Will not rot or corrode
- Can be applied in uniform thickness to horizontal and vertical surfaces
- Most properties improve with age



Usage Guide

SUBSTRATE PREPARATION
- The surface should be cleaned to remove all dust, foreign matters, loose materials or any deposits of contamination which could affect the bond between the surface and the VURA AcryStik coating. This can be done by scarifying, grinding, water blasting, sand blasting, and acid washing or by any other approved method.
- Application area should have minimum undulation. Any high undulation should be corrected before the application.
- New flat/level surface like sub-base concrete shall be made reasonably smooth so as not to impede the application of VURA AcryStik coating and to avoid sharp projections.
- Concrete surfaces shall be thoroughly pre-wetted prior to the application of VURA AcryStik coating by pouring water on flat surface or by spraying water on vertical/inclined surfaces. There should not be any standing water

APPLICATION
BOND COAT SLURRY / VURA ACRYSTIK COATING
- VURA AcryStikmix with cement in ratio of 1:2
- Mix thoroughly for homogeneous, lump free mixture
- Wait for 5-10 minutes to release entrapped air bubbles
- Apply using brush or suitable tools; so slurry can be evenly spread

BRUSH TOP COATING
- VURA AcryStikmix with cement and fine sand in ratio of 1: 2 : 2
- Mix thoroughly preferably with mechanical stirrer / mixing machine for homogeneous mixing
- Wait for 5-10 minutes to release entrapped air bubbles.
- Apply the mixer at required place using appropriate tools or Brush
- Two or more coats are recommended in 4-6 hrs waiting time.

MORTAR MODIFIER
- VURA AcryStik mix with water in ratio of 1:2, and add mixture of cement and fine sand as per 5:15 ratio.
- Mix thoroughly preferably with mechanical stirrer / mixing machine for homogeneous mixing.
- Apply the mixer at required place using appropriate tools for better finishing
Description

VURA AcryStik

VURA AcryStik is a white acrylic based polymer liquid with multipurpose uses to provide flexible cementitious coating system. VURA AcryStik polymer adds to the potential use as well as enhances the properties of cement slurry/mortar/concrete making them excellent choice for use in new as well as renovation work. It is a modified acrylic polymer for coating, bonding agent, repair and priming of reinforce concrete. It is economical and hard wearing system with water resistance property






Features

- Combines a tough, flexible, hard-wearing surface with waterproofing
- Enhances the properties of cement slurry / mortar / concrete
- Develops excellent bond to most building materials
- UV resistance & Non corrosive to mild chemicals attack
- High durability in continuous wet condition
- Protective coating for cement surfaces
- Allows trapped vapour to escape thus preventing peeling and blistering.
- Reduces or prevents salt penetration into concrete
- Is non-flammable and does not give off toxic gases, when exposed to fire
- Will not rot or corrode
- Can be applied in uniform thickness to horizontal and vertical surfaces
- Most properties improve with age



Usage Guide

SUBSTRATE PREPARATION
- The surface should be cleaned to remove all dust, foreign matters, loose materials or any deposits of contamination which could affect the bond between the surface and the VURA AcryStik coating. This can be done by scarifying, grinding, water blasting, sand blasting, and acid washing or by any other approved method.
- Application area should have minimum undulation. Any high undulation should be corrected before the application.
- New flat/level surface like sub-base concrete shall be made reasonably smooth so as not to impede the application of VURA AcryStik coating and to avoid sharp projections.
- Concrete surfaces shall be thoroughly pre-wetted prior to the application of VURA AcryStik coating by pouring water on flat surface or by spraying water on vertical/inclined surfaces. There should not be any standing water

APPLICATION
BOND COAT SLURRY / VURA ACRYSTIK COATING
- VURA AcryStikmix with cement in ratio of 1:2
- Mix thoroughly for homogeneous, lump free mixture
- Wait for 5-10 minutes to release entrapped air bubbles
- Apply using brush or suitable tools; so slurry can be evenly spread

BRUSH TOP COATING
- VURA AcryStikmix with cement and fine sand in ratio of 1: 2 : 2
- Mix thoroughly preferably with mechanical stirrer / mixing machine for homogeneous mixing
- Wait for 5-10 minutes to release entrapped air bubbles.
- Apply the mixer at required place using appropriate tools or Brush
- Two or more coats are recommended in 4-6 hrs waiting time.

MORTAR MODIFIER
- VURA AcryStik mix with water in ratio of 1:2, and add mixture of cement and fine sand as per 5:15 ratio.
- Mix thoroughly preferably with mechanical stirrer / mixing machine for homogeneous mixing.
- Apply the mixer at required place using appropriate tools for better finishing