VURA PreVento

VURA Prevento is a solvent based impregnator for façade, used for natural porous stones and preserves a natural look. It is hydrophobic and oleophobic stone impregnator. It is an economical nano impregnating sealer designed for protection of porous stones against water, oil and other stains.

CHARACTERISTICS

- Nano Impregnating technology
- Hydrophobic and oleophobic based product
- Designed for protection of porous stones
- Preserves natural look
- Weather resistant

Usage Guide

- Natural stones such as marble
- Sandstones
- Granite
- Travertine
- Limestone

SURFACE PREPARATION
- Surface preparation should be between 10 to 35 deg C and structurally sound, clean and free from waxes, dirt and coatings
- The surface should be dry
- Ensure that area is well ventilated

APPLICATION
- Spread the material over the substrate using a mop / paint brush / roller or cloth
- Use garden sprayer pump. Do not use power sprayer
- Allow Vura Prevento to penetrates into the surface for 15-30 minutes. During this time, spread the Vura Prevento over entire area to ensure even penetration
- Do not allow excess material to dry on surface
- Second coat can be applied after 30-40 minutes after initial application, if needed for porous absorbent surface
- To remove excess Vura Prevento, after 15-30 minutes of application, Wipe the entire area with clean dry towel
- To remove residue, reapply a thin coat of Vura Prevento, allow to dwell it for 2-3 minutes, agitate with dry nylon pad and dry thoroughly with clean, dry towel
- Full cured is achieved after 24-72 hrs
- Foot traffic is allowed after 6-8 hrs