VURA PoliMast

VURA PoliMast is a high viscous thixotropic paste product based on unsaturated polyester resins containing filling agents suitable to glue and to fix marbles, onyx and stone in vertical surfaces. The hard product is well dry, polishable and sandable in a very short time. The product has low shrinkage, good adhesion in many stones. Low styrene content.

CHARACTERISTICS

- Good working properties creamy-soft consistency, especially on vertical surfaces
- Fast hardening (20-30 minutes)
- Good working properties (grinding, milling, drilling)
- Good polishing properties
- Very good adhesion on natural stones also at higher temperatures
- Resistance to water, petrol and mineral oils

FIELD OF APPLICATION
VURA PoliMast is mainly used in stone processing industry for filling and bonding natural and artificial stones. Due to its creamy-soft consistency the product is suite to fill larger areas especially on vertical surfaces.

Usage Guide

SURFACE PREPARATION
- The surface to be treated must be clean, completely dry and slightly roughened
- Colouring is possible by adding Polyester Colouring Pastes up to max 5%
- Dilution is not possible

MIXING
- Take the necessary quantity of PoliMast from the container and add 2-3 part of hardener B in 100 part of PoliMast
- Mix both components thoroughly. The mixture can be worked for about 3-5 minutes (25oC)
- After 20-30 minutes the treated parts can be further processed and transported
- The hardening process is accelerated by heat and delayed by cold
- An excess of color may influence the final characteristics of the glue
- Tools can be cleaned with thinner or mineral spirit
- Keep the tins closed after usage. Keep the glue and the catalyst away from the sunlight