VURA DenStone200

VURA DenStone 200 is a Nano lithium chemistry based densifier and marble hardener that penetrates into the marble and reacts with the marble to form compounds which expand and ﬁll the pores in the stone. Not only reduce the porosity but also leads to enhanced shine and longevity of polish.

Densiﬁcation makes the marble harder and denser. It is colorless liquid increase the stone strength and provides high gloss finish. It is lithium chemistry for marble, natural stones, terrazzo and concrete.

CHARACTERISTICS

- Easy application
- Strengthen the surface
- Penetrates and seals new and existing marble, natural stones, terrazzo and concrete
- Improves chemical and water resistance
- Prolongs finish of polished surfaces
- Resists stains and Increase abrasion
- Making surface easy to use and maintain
- Environmentally friendly, water based formula
- Interior and Exterior use
- Protects against efflorescence
- Enhance gloss after polish
- Preserves Natural look

Usage Guide

For the treatment of ground and polished absorbent marble, natural stone, slate, limestone, sandstone, granite, travertine etc.

SURFACE PREPARATION
- Clean the surface to remove any dirt, laitance, curing compound and surface coating
- Surface should be sound, clean and free of waxes, dirt and coatings

APPLICATION
- To prepare the surface for application ﬁrst grind the stone with the abrasives
- Wash the ﬂoor with Floor cleaner & make sure it’s completely dry before starting application
- Cover adjoining fabric, plastic or parquet ﬂoors. Protect furniture from splashes
- Pour onto the surface and spread it evenly for ease of absorption
- Wait for each coat to be completely absorbed before applying the next coat
- For maximum effect do 5 to 6 applications. Stop applying when the stone no longer absorbs
- Wait at minimum of 24 hours after the last coat and then use the abrasives
- Apply 2-3 additional coats for best results
- Finish the polishing process